1911 Specific Tools - Jigs - Fixtures

 
10-8 Armorer Block Challis Full Size Bushing Extractor
10-8 Armorer BlockChallis Full Size Bushing Extractor
 

 

$54.95

$26.99

$25.64

Challis Slim Bushing Extractor Colt Bushing Wrench
Challis Slim Bushing ExtractorColt Bushing Wrench

 

 

$26.99

$25.64

$24.99

$9.95

RecoilMaster, STI - Take Down Tool - 3.9 and 4.5 Inch Gun SDM 1911 FIRING PIN STOP REMOVAL TOOL
RecoilMaster, STI - Take Down Tool - 3.9 and 4.5 Inch GunSDM 1911 FIRING PIN STOP REMOVAL TOOL

 

 

$3.00

$20.00

$19.39

10-8 Performance Armorer Tool 1911 Bench Block
10-8 Performance Armorer Tool1911 Bench Block
 
 

$8.95

$22.99

$13.79

1911 Frame/Gun Holder EGW 1911 DELRIN PLUNGER TUBE STAKE-IN TOOL
1911 Frame/Gun HolderEGW 1911 DELRIN PLUNGER TUBE STAKE-IN TOOL
 
 

$31.99

$12.79

$30.00

$29.10

1911 Grip Bushing Tap .236"-60 Thread 1911 Grip Bushing Tap Oversize thread bushing tap. .255"-60 TPI
1911 Grip Bushing Tap .236"-60 Thread 1911 Grip Bushing Tap Oversize thread bushing tap. .255"-60 TPI

 

 

$39.99

$24.94

$39.99

$24.94

1911 Grip Screw Tap .150"X50TPI Thread 1911 Grip Bushing Tap Set - Standard / Oversize
1911 Grip Screw Tap .150"X50TPI Thread 1911 Grip Bushing Tap Set - Standard / Oversize

 

 

$29.99

$20.95

$80.00

$48.00

EGW 1911 BARREL BLOCK / LOCK-UP GAUGE EGW FIRING PIN STOP GAUGE
EGW 1911 BARREL BLOCK / LOCK-UP GAUGEEGW FIRING PIN STOP GAUGE
 
 

$25.00

$24.25

$30.00

$29.10

EGW SLIDE BORE GAUGE EGW Hood Length Gauge
EGW SLIDE BORE GAUGEEGW Hood Length Gauge
 
 

$49.99

$48.49

$25.00

$24.50

EGW Trigger Fitting Gauge EGW PARA BARREL RAMP CUTTER
EGW Trigger Fitting GaugeEGW PARA BARREL RAMP CUTTER

EGW Trigger Fitting Gauge With six sizes to gauge from, this gauge takes the guess work out fitting your trigger. The EGW trigger fitting gauge is machined from 7075 grade aluminum, and hard-coat anodized. Material: Aluminum Finish: Anodized...

EGW PARA BARREL RAMP CUTTER Use this cutter to machine the frame to install Para and Clark ramped barrels. This tool has a .360" diameter with a 3/8" shank and is made from carbide. Recommended cutting speed: 500 RPM

$30.00

$29.40

$30.00

$29.10

EGW 6" WILSON/NOWLIN BARREL RAMP CUTTER
EGW 6" WILSON/NOWLIN BARREL RAMP CUTTER
 

$60.00

$58.20